Mac-Tech Coil Recoiler RC-20
The Mac-Tech Coil Recoiler RC-20 is a heavy-duty coil handling system used in continuous-feed, high-volume metal coil processing for roofing panels, building facades, automated factories, and steel service centers, where reliable recoiling and line integration are critical.
In Brief
- Designed for metal coil handling within continuous feed coil lines and automated production environments.
- Applied in high-volume production of roofing panels and architectural building facades.
- Commonly integrated in steel service centers and automated factories for metal coil processing.
- Intended to work as part of a larger coil line (uncoiler, leveler, roll former, cut-to-length, etc.).
- Focuses on controlled recoiling of processed strip for further handling, storage, or downstream operations.
What It Typically Costs
Typical pricing for a Mac-Tech Coil Recoiler RC-20 is approximately $250,000 – $2,000,000 USD, depending on configuration, automation level, and line integration.
- Lower end of the range generally corresponds to simpler, stand-alone or lightly automated recoilers.
- Upper end reflects highly integrated systems within complex continuous-feed coil lines in automated factories.
- Installation, commissioning, and integration with upstream/downstream equipment can materially affect total project cost.
- Options such as automated threading, coil car interfaces, and advanced control systems typically add to the price.
- Budget should also account for operator training, spare parts packages, and periodic maintenance services.
Performance / Spec Considerations
- Coil capacity (width, thickness, weight) – Confirm the recoiler’s maximum coil width, material thickness range, and coil weight to ensure compatibility with your roofing panel and facade product mix.
- Line speed and throughput – Match recoiler speed capability to the rest of the continuous feed line so it can support high-volume production without becoming a bottleneck.
- Mandrel and expansion range – Verify that the mandrel diameter and expansion range cover the inner diameter (ID) requirements of your coils used in steel service centers and automated plants.
- Tension control and winding quality – Evaluate how tension is applied and controlled to maintain tight, even coils suitable for downstream handling and storage, especially for thin-gauge facade and roofing materials.
- Integration with coil handling equipment – Consider compatibility with coil cars, upenders, threading devices, and loop control systems in your existing or planned coil line.
- Automation and controls – Assess the level of automation (e.g., recipe-based setups, automatic speed synchronization, safety interlocks) and how well the controls integrate with the overall plant control architecture.
- Safety and guarding – Ensure adequate guarding, emergency stops, and safety systems appropriate for high-volume, continuous-feed environments.
What to Inspect Before You Buy
- Confirm rated coil width, thickness, and maximum coil weight against your current and future product requirements.
- Inspect mandrel condition, expansion mechanism, and surfaces for wear, damage, or signs of poor maintenance.
- Verify functionality of tension control systems and braking components, checking for smooth, stable operation.
- Review the condition and responsiveness of the control system, HMI, and any integrated automation features.
- Check for structural integrity of the frame, base, and supports, looking for cracks, deformation, or misalignment.
- Evaluate safety features: guards, light curtains, interlocks, and emergency stop circuits for completeness and compliance with your standards.
- Confirm compatibility and interface points with existing or planned upstream and downstream coil line equipment.
- Request maintenance records, service history, and any documentation on previous repairs or retrofits.
- Assess availability of spare parts, technical support, and documentation (manuals, electrical diagrams, parts lists).
- Perform a test run with representative material if possible, checking winding quality, line speed, and overall stability.
FAQ
What is the Mac-Tech Coil Recoiler RC-20 used for? It is used for recoiling metal strip in continuous-feed, high-volume coil processing lines, especially for roofing panels, building facades, and steel service center operations.
In what types of facilities is this recoiler typically installed? It is typically installed in steel service centers and automated factories dedicated to metal coil processing and continuous-feed production.
How does it fit into a coil line? The recoiler is usually positioned at the end of a coil line, rewinding processed strip coming from equipment such as levelers, roll formers, or cut-to-length machines.
What is the typical cost range for an RC-20 recoiler? The typical cost range is about $250,000 – $2,000,000 USD, depending on configuration and integration level.
Is it suitable for roofing panel production? Yes, it is specifically used in continuous-feed, high-volume production of roofing panels and related building envelope products.
Can it handle coils for architectural building facades? Yes, it is applied in processing coils for building facades where consistent tension and winding quality are important.
What should I look for when buying a used recoiler? Focus on coil capacity ratings, mandrel condition, tension control performance, structural integrity, safety systems, and evidence of regular maintenance.
Does the recoiler operate independently or as part of an automated system? It is generally integrated as part of an automated coil line, synchronized with upstream and downstream equipment in continuous-feed production.
Why is tension control important on a recoiler? Proper tension control ensures tight, uniform coils that are safe to handle, store, and feed into subsequent processes without damage or telescoping.
How does this equipment benefit steel service centers? It supports high-volume coil processing by reliably recoiling processed strip, enabling efficient material flow and packaging for customers.
Source: Mac-Tech Coil Recoiler RC-20
Mac-Tech Coil Recoiler RC-20
