Carbide Saws

90 Degree Cuts Suitable for Ferrous and Non-Ferrous Materials

The CSNC-125 allows for user friendly programming of cutting cycles. Featuring a colour touch screen control and “set up wizard” for quick set-up of jobs. 200 cutting programs can be saved for repeat jobs and a comprehensive US Steel grade menu assists in setting proper cutting parameters.

Featuring a 1” – 5” round capacity at 90°, 25 HP motor, and a 460 mm blade, the CSNC-125 is a versatile high-speed cutting machine. HYDMECH Manufacturers Sawing>Carbide Saws

Does the Work of Five Conventional Band Saws!

A highly efficient and productive saw designed for use with a carbide tipped blade

A superior sawing solution supported by top-of-the-line service technicians and a well-stocked parts department to keep your production going strong!

Designed and built with off-the-shelf parts easily found at local suppliers and supply houses for quick repairs.

Featuring a 0.4” – 2.55” round capacity at 90°, 10 HP motor, and a 250 mm blade, the CSNC-65 is a versatile high-speed cutting machine. HYDMECH Manufacturers Sawing>Carbide Saws

Designed for Operator Safety

Designed for operator safety, this machine is completely enclosed and features safety door interlocks which if a door opens during operation, the machine will shut off.

Achieve consistent results with this carbide sawing machine that features a high level of productivity, length accuracy, and clean, burr free cuts.

Featuring a 1.97” – 6.9” round capacity at 90°, 40 HP motor, and a 560 mm blade, the CSNC-175 is a versatile high-speed cutting machine. HYDMECH Manufacturers Sawing>Carbide Saws

High Cutting Performance on a Wide Variety of Materials

The largest and most powerful in the HYDMECH line up, the CSNC-200 features an inclined loading table designed to work during automatic operation.

After a bar length has reached its remnant end, the machine will load a new bar. It will continue to cycle as long as bars remain on the loader or until the predetermined number of cuts were made.

Featuring a 1.96” – 7.87” round capacity at 90°, 50 HP motor, and a 650 mm blade, the CSNC-200 is a versatile high-speed cutting machine. HYDMECH Manufacturers Sawing>Carbide Saws

Increase Efficiency Without Sacrificing Quality!

Achieve consistent results with this carbide sawing machine that features a high level of productivity, length accuracy, and clean, burr free cuts.

Trim cuts and remnants are separated from good parts automatically via a heavy-duty discharge sorting chute. Designed for operator safety, this machine is completely enclosed and features safety door interlocks which if a door opens during operation, the machine will shut off.

Featuring a 0.4” – 3.15” round capacity at 90°, 15 HP motor, and a 285 mm blade, the CSNC-80 is a versatile high-speed cutting machine. HYDMECH Manufacturers Sawing>Carbide Saws

High Speed, Automatic Circular Sawing Machine

Cut with the highest level of precision with the lowest possible cycle time with the CSNC-150 model. Designed for use with carbide tipped blades, one carbide circular saw is so fast that just one machine can produce the same output as five band saws.

Featuring a 1.18” – 6” round capacity at 90°, 40 HP motor, and a 460mm blade, the CSNC-150 is a versatile high-speed cutting machine. HYDMECH Manufacturers Sawing>Carbide Saws

Get the Close-cut Off, Length Tolerance, Squareness, and Finish of Cut That Your Customers Demand.

The CSNC-100 features advanced technology for high speed performance. With energy efficiency in mind, the hydraulics are designed to be highly efficient with low energy consumption.

The shuttle is powered by a ball screw and vector motor and features automatic multi-indexing up to 39” in a single stroke. This means accurate, fast cuts to get maximum productivity from your investment.

Featuring a 1” – 4” round capacity at 90°, 20 HP motor, and a 360 mm blade, the CSNC-100 is a versatile high-speed cutting machine. HYDMECH Manufacturers Sawing>Carbide Saws