Hydmech S-200A-900 Automatic Horizontal Band Saw

Used in Structural Fabrication, Steel Service Centers, Machine Shops for Cutting Stock Material, Structural Members, Tube Cutting

The Hydmech S-200A-900 automatic horizontal band saw is designed for efficient cutting of stock material, structural members, and tubing in structural fabrication shops, steel service centers, and general machine shops, offering automated, repeatable cuts for higher throughput and reduced manual handling.

In Brief

• Automatic horizontal band saw intended for production cutting of steel and other common structural materials.
• Used for cutting stock material, structural members, and tubes where consistent, repeatable cuts are required.
• Suited to structural fabrication, steel service centers, and machine shops needing higher throughput than manual saws.
• Automation typically includes automatic indexing/feeding of material and automatic cutting cycles to reduce operator involvement.
• Horizontal band configuration supports stable clamping of long or heavy workpieces.

Budgeting & Pricing

• Typical price range: $8,000 – $80,000 USD, depending on age, condition, options, and level of automation.
• Lower end of the range often corresponds to older, lightly automated, or smaller-capacity units or machines needing refurbishment.
• Upper end reflects newer machines, larger cutting capacities, better automation, and integrated material handling features.
• Factor in installation, electrical hookup, and possible foundation or anchoring costs when budgeting.
• Ongoing costs include blades, coolant, routine maintenance items, and potential service visits for hydraulic or control issues.
• If buying used, budget for initial consumables (new blade, coolant, filters) and a baseline service/inspection.

Performance / Spec Considerations

• Cutting capacity (height/width and shapes) – Confirm the maximum size of structural members, bar stock, and tubes you need to cut and match that to the saw’s rectangular and round capacity ranges.
• Material type and wall thickness – Ensure the saw can handle the full range of materials (e.g., mild steel structural shapes, solid bar, tubing) and wall thicknesses you commonly cut, with appropriate blade selection.
• Automation level and indexing length – Review how the automatic feed/index system handles long stock and repetitive cut lengths, including maximum single-index length and accuracy for production runs.
• Cutting rate and duty cycle – Assess how quickly the machine can process typical jobs and whether it can sustain continuous operation in a structural fabrication or steel service center environment.
• Vise/clamping configuration – Check that the workholding system securely clamps structural members and tubes to minimize vibration and improve cut quality, especially on bundles or thin-wall sections.
• Blade size and drive power – Consider the blade dimensions and drive motor power, as these influence cutting speed, ability to handle larger cross-sections, and overall productivity.
• Coolant and chip management – Look for effective coolant delivery and chip evacuation features to support longer blade life and cleaner operation when cutting structural and tubular materials.

Pre-Purchase Checklist

• Verify the saw’s cutting capacity (height, width, and round) against the largest stock material, structural members, and tubes you plan to cut.
• Inspect the condition of the blade guides, wheels, and drive system for wear, alignment issues, or unusual noise during operation.
• Check the automatic indexing/feed system for smooth, repeatable movement and confirm it accurately achieves programmed cut lengths.
• Confirm the condition and operation of hydraulic systems (clamping, feed, lift) including hoses, cylinders, and valves for leaks or sluggish response.
• Test the control panel and all automatic cycle functions to ensure reliable starts, stops, and emergency stop operation.
• Evaluate the vise and clamping mechanisms for rigidity and ability to hold structural shapes and tube bundles without slipping.
• Review electrical requirements and confirm compatibility with your facility’s power supply and safety standards.
• Inspect coolant system components (pump, lines, tank) and chip handling areas for cleanliness, corrosion, or missing guards.
• Ask for maintenance history, service records, and any documentation or manuals available for the specific machine.
• Run test cuts on representative materials to assess cut quality, squareness, surface finish, and cycle time.

FAQ

What types of work is the Hydmech S-200A-900 best suited for? It is intended for efficient cutting of stock material, structural members, and tubes in structural fabrication, steel service centers, and machine shops.

Is this saw appropriate for production environments? Yes, as an automatic horizontal band saw, it is designed to handle repetitive cuts and higher throughput than manual or semi-automatic machines.

What is the typical cost range for this type of saw? The indicated pricing estimate is $8,000 – $80,000 USD, depending on age, condition, capacity, and automation level.

Can it cut both solid structural members and tubing? Yes, it is described as being used for cutting stock material, structural members, and tube cutting applications.

How important is the automatic indexing feature? Automatic indexing is important if you perform many repetitive cuts, as it reduces manual handling, improves consistency, and increases productivity.

What should I look for when buying used? Focus on cutting capacity, condition of mechanical and hydraulic components, accuracy of the automatic feed, control reliability, and overall maintenance history.

Do I need special blades for different materials? Blade selection should be matched to the materials and wall thicknesses you cut; different tooth forms and pitches are typically used for solids versus thin-wall tubing.

How does a horizontal band saw benefit structural fabrication? It allows secure clamping of long or heavy structural members, consistent cut lengths, and automated cycles that support higher throughput.

What ongoing costs should I expect? Plan for replacement blades, coolant, routine maintenance items, and occasional service for hydraulic or control systems.

Can this machine be integrated into a material handling line? Automatic horizontal band saws are commonly used with infeed and outfeed handling, but the exact integration options depend on the specific configuration and accessories supplied.

Source: Hydmech S-200A-900 Automatic Horizontal Band Saw

Strength: Efficient Cutting

Hydmech Saw > Horizontal Band Saw, Material Cutting

Mac-Tech Sales: https://mac-tech.com/contact-us/

Machine Parts & Service: https://mac-tech.com/need-a-part/