BYSTRONIC PR 200 X 4100
The BYSTRONIC PR 200 x 4100 is a hydraulic CNC press brake commonly used for precision bending of sheet and plate, offering around 4.1 m bending length and a nominal 200‑ton class capacity, making it suitable for a wide range of forming tasks in fabrication and general metalworking.
Overview
The BYSTRONIC PR 200 x 4100 is a used press brake in the 200‑ton, 4100 mm (4.1 m) length class, intended for bending and forming operations. As a CNC hydraulic press brake, it is typically used in job shops, contract fabrication, and production environments where repeatable, accurate bends are required. Being a used machine, its value and suitability depend heavily on condition, control generation, and tooling/option package.
What It Typically Costs
Pricing estimate (USD): Varies by configuration.
- Used 200‑ton class, 4 m CNC press brakes often show a wide price spread depending on age, hours, options, and condition; expect older or basic units to be markedly cheaper than later‑generation machines with advanced controls and crowning.
- Machines with modern CNC controls, offline programming capability, and extensive tooling packages generally command a premium over base configurations.
- Condition of hydraulic system, backgauge, and ram accuracy can significantly influence the final selling price, even between machines of the same year.
- Installation, commissioning, and any required retrofit (safety upgrades, control updates, or new tooling) should be budgeted separately from the purchase price.
- Transport costs can vary due to machine weight and footprint; factor rigging and freight into the total project cost.
Performance / Spec Considerations
- Bending length (~4100 mm class): Suitable for bending long parts such as panels and chassis sections; verify usable daylight and throat depth for your largest parts.
- Tonnage (~200‑ton class): Typically appropriate for medium‑thickness plate in common steels over a 4 m span; confirm required tonnage from your material thickness, grade, and V‑die openings.
- CNC control capability: Check axis count (e.g., Y1/Y2, X, possibly R/Z) and programming features such as angle correction, bend sequence calculation, and memory capacity for part programs.
- Backgauge system: Accuracy, repeatability, travel range, and speed are critical for productivity, especially in batch work with multiple bends per part.
- Deflection and crowning: Presence and condition of mechanical or hydraulic crowning (if equipped) affects bend angle consistency across the full 4100 mm length.
- Open height, stroke, and daylight: Determine how easily you can run box forms, deep flanges, and tall tools; limited open height can restrict tooling and part geometry.
- Tooling interface and condition: Confirm type of punch/die holders, clamping style, and compatibility with your existing tooling; inspect for wear, nicks, and alignment issues.
What to Inspect Before You Buy
- Verify ram accuracy and repeatability across the full 4100 mm length using test bends or a dial indicator, checking for angle variation from left to right.
- Inspect hydraulic system for leaks, unusual noise, temperature issues, and response time; review any service records for pump, valve, or cylinder work.
- Check the CNC control for proper operation: screen clarity, keypad/touchscreen responsiveness, alarm history, and ability to load/save programs.
- Evaluate backgauge movement for smooth travel, positional accuracy, and backlash; confirm all programmed positions match physical measurements.
- Inspect guides, gibs, and ram ways for excessive wear, scoring, or play that could affect long‑term accuracy.
- Confirm safety systems (light curtains, guards, foot pedal, E‑stops) are present, functional, and compliant with your local regulations.
- Examine electrical cabinet for cleanliness, obvious modifications, loose wiring, or obsolete components that may be hard to support.
- Review mechanical condition of the frame and bed for signs of overloading, cracks, or permanent deflection.
- Check included tooling (punches, dies, holders) for wear and compatibility with your intended applications.
- Run the machine through a complete bending cycle at working speed to listen for abnormal noises and observe cycle consistency.
Buyer Questions
What type of machine is the BYSTRONIC PR 200 x 4100? It is a hydraulic CNC press brake intended for bending and forming sheet and plate materials.
What is the approximate working length of this model? The designation “4100” indicates a bending length in the roughly 4100 mm (4.1 m) class.
What does the “200” in PR 200 x 4100 typically refer to? It generally refers to a nominal 200‑ton class bending capacity, suitable for many medium‑thickness plate applications over the full length.
Is this machine suitable for high‑precision bending work? It is designed for precision bending, but actual accuracy depends on the specific machine’s condition, control features, and crowning/backgauge setup.
How important is the CNC control version on a used PR 200 x 4100? Control generation affects ease of programming, available functions, and supportability, so it is a key factor in both usability and resale value.
Can I bend long panels with this machine? Yes, its roughly 4.1 m bending length is well‑suited for long panels, provided the tonnage and tooling match the material thickness and width.
What should I focus on when evaluating a used unit? Prioritize ram accuracy, hydraulic and backgauge condition, control functionality, frame integrity, and safety systems.
Does the machine’s age matter as much as its condition? Condition and maintenance history are usually more critical than age alone, although very old controls or components can affect support and parts availability.
Will I need new tooling for this press brake? You may, depending on the included tooling package and your part requirements; verify tooling type and compatibility before purchase.
Are installation and rigging included in typical used pricing? They are often not included; plan separately for rigging, transport, installation, and any required commissioning or safety upgrades.
Source: BYSTRONIC PR 200 X 4100
BYSTRONIC PR 200 X 4100
