Hydmech S-150A-700 Automatic Horizontal Band Saw
Hydmech Horizontal Band Saw, Material Cutting Used in Efficient Cutting Structural Fabrication, Steel Service Centers, Machine Shops for Cutting Stock Material, Structural Members, Tube Cutting
-
-
Hydmech V-18APC – Saw
Hydmech V-18APC Performs general metal fabrication tasks Standard industrial range. Core: Efficient Cutting. Materials: Steel, Stainless Steel, Aluminum. Outputs: General Metal Parts.
-
Hydmech CSNC-80
Increase Efficiency Without Sacrificing Quality!
Achieve consistent results with this carbide sawing machine that features a high level of productivity, length accuracy, and clean, burr free cuts.
Trim cuts and remnants are separated from good parts automatically via a heavy-duty discharge sorting chute. Designed for operator safety, this machine is completely enclosed and features safety door interlocks which if a door opens during operation, the machine will shut off.
Featuring a 0.4” – 3.15” round capacity at 90°, 15 HP motor, and a 285 mm blade, the CSNC-80 is a versatile high-speed cutting machine. HYDMECH Manufacturers Sawing>Carbide Saws
-
Hydmech M-20A
The M-20A is an automatic horizontal pivot band saw providing exceptional miter cutting capability for heavy-duty applications.
It features a powerful motor and gearbox with variable frequency drive to provide exceptional cutting performance on a wide range of material.
The M-20A band saws standard PLC 500 control features a “go to” function which allows for automatic alternating between programmed angles. The M-20A miters from 90° to 60°.
Featuring a 20″H x 30″W capacity at 90°, 10 HP motor, and 1 1/2″ blade, the M-20A is a reliable choice for your heavy-duty metal cutting applications. HYDMECH Manufacturers Sawing>Horizontal Pivot
-
Hydmech H-50A-250 Dual Column Horizontal Band Saw – Saw
Hydmech H-50A-250 Dual Column Horizontal Band Saw Cuts bar, tube, or structural material to length Cuts materials up to 18 inches diameter. Core: Efficient Cutting. Materials: Structural Steel, Mild Steel, Aluminum. Outputs: Cut Sections, Tubes, Bars.
-
Hydmech S-20A-150 Semi-Automatic Horizontal Band Saw
Hydmech Horizontal Band Saw, Material Cutting Used in Efficient Cutting Structural Fabrication, Steel Service Centers, Machine Shops for Cutting Stock Material, Structural Members, Tube Cutting
-
Hydmech S-60A-450 Automatic Horizontal Band Saw
Hydmech Horizontal Band Saw, Material Cutting Used in Efficient Cutting Structural Fabrication, Steel Service Centers, Machine Shops for Cutting Stock Material, Structural Members, Tube Cutting
-
Hydmech V-35APC Automatic Vertical Band Saw – Saw
Hydmech V-35APC Automatic Vertical Band Saw Cuts bar, tube, or structural material to length Cuts materials up to 18 inches diameter. Core: Efficient Cutting. Materials: Structural Steel, Mild Steel, Aluminum. Outputs: Cut Sections, Tubes, Bars.
-
Akyapak AHS-V 40/15-20 Vertical Plate Roll – Plate Roll
Akyapak AHS-V 40/15-20 Vertical Plate Roll Rolls plate into cylinders Handles thick plate up to 2 inches. Core: Heavy Duty. Materials: Mild Steel, Stainless Steel, Aluminum. Outputs: Cylinders, Tanks, Pipes.
-
Hydmech M-16A – Saw
Hydmech M-16A Performs general metal fabrication tasks Standard industrial range. Core: Efficient Cutting. Materials: Steel, Stainless Steel, Aluminum. Outputs: General Metal Parts.
End of content
End of content